生まれ変わる - umarekawaru

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<markdown>
# Description
This example demonstrates how to configure a Site-to-Site IPSec VPN with Strongswan and SSL certificates. The example was tested and verified using Fedora VMs in GNS3.
# Install
Install the strongswan package from fedora package repository.
```bash
dnf install -y strongswan
```
# Configuration
## IP Forwarding
Enable IPv4 traffic forwarding on both VPN sites.
/etc/sysctl.conf
```bash
net.ipv4.ip_forward = 1
```
Reload sysctl settings
```bash
sysctl -p
```
## Network
Configure a network interface for the WAN connection between VPNs and a network interface for the LAN host network.
### VPN-Site-1
```bash
nmcli connection add ifname ens4 connection.id wan connection.type 802-3-ethernet mtu 1460 ipv4.method manual ipv4.address 100.64.20.1/30
nmcli connection add ifname ens5 connection.id lan connection.type 802-3-ethernet ipv4.method manual ipv4.address 192.168.80.1/24 mtu 1460
nmcli connection reload
```
### VPN-Site-2
```bash
nmcli connection add ifname ens4 connection.id wan connection.type 802-3-ethernet mtu 1460 ipv4.method manual ipv4.address 100.64.20.2/30
nmcli connection add ifname ens5 connection.id lan connection.type 802-3-ethernet ipv4.method manual ipv4.address 192.168.90.1/24 mtu 1460
nmcli connection reload
```
## Firewall
Configure firewall rules for both VPN sites.
```bash
firewall-cmd --permanent --add-zone=wan
firewall-cmd --permanent --change-zone=ens4 --zone=wan
firewall-cmd --zone=wan --permanent --add-rich-rule='rule protocol value="esp" accept'
firewall-cmd --zone=wan --permanent --add-rich-rule='rule protocol value="ah" accept'
firewall-cmd --zone=wan --permanent --add-port=500/udp
firewall-cmd --zone=wan --permanent --add-port=4500/udp
firewall-cmd --zone=wan --permanent --add-service="ipsec"
firewall-cmd --reload
```
## Certificates
1. Generate and sign certificates and private keys for both VPN sites.

2. Copy the CA certificate, server certificate, and private key to both VPN sites.
```bash
cp <ca_cert> /etc/strongswan/ipsec.d/cacerts/
cp <server_cert> /etc/strongswan/ipsec.d/certs/
cp <vpn_key> /etc/strongswan/ipsec.d/private/
```

3. Add the CA certificate to the certificate trust store.
```bash
cp <ca_cert> /etc/pki/ca-trust/source/anchors/
update-ca-trust
```

## VPN
The default `left` site is local and the `right` site is remote, however you can designate either site as left or right. 
### VPN-Site-1
/etc/srongswan/ipsec.conf
```
config setup
        charondebug="all"
        uniqueids=yes
        strictcrlpolicy=no
conn %default
conn tunnel-to-site-2
        left=100.64.20.1
        leftsubnet=192.168.80.0/24
        right=100.64.20.2
        rightsubnet=192.168.90.0/24
        ike=aes256-sha2_256-modp1024!
        esp=aes256-sha2_256!
        keyingtries=0
        lifetime=1h
        lifetime=8h
        dpddelay=30
        dpdtimeout=120
        dpdaction=restart
        auto=start
        fragmentation=yes
        keyexchange=ikev2
        type=tunnel
        leftcert=vpn1cert.pem
        leftid="C=US, ST=Michigan, L=Livonia, O=KobaNet, OU=NetOps, CN=vpn1.koba.ninja"
        rightid="C=US, ST=Michigan, L=Livonia, O=KobaNet, OU=NetOps, CN=vpn2.koba.ninja"
```
/etc/strongswan/ipsec.secrets
```
: RSA vpn1key.pem
```
### VPN-Site-2
/etc/srongswan/ipsec.conf
```
config setup
        charondebug="all"
        uniqueids=yes
        strictcrlpolicy=no
conn %default
conn tunnel-to-site-2
        left=100.64.20.2
        leftsubnet=192.168.90.0/24
        right=100.64.20.1
        rightsubnet=192.168.80.0/24
        ike=aes256-sha2_256-modp1024!
        esp=aes256-sha2_256!
        keyingtries=0
        lifetime=1h
        lifetime=8h
        dpddelay=30
        dpdtimeout=120
        dpdaction=restart
        auto=start
        fragmentation=yes
        keyexchange=ikev2
        type=tunnel
        leftcert=vpn1cert.pem
        leftid="C=US, ST=Michigan, L=Livonia, O=KobaNet, OU=NetOps, CN=vpn2.koba.ninja"
        rightid="C=US, ST=Michigan, L=Livonia, O=KobaNet, OU=NetOps, CN=vpn1.koba.ninja"
```
/etc/strongswan/ipsec.secrets
```
: RSA vpn2key.pem
```
# Run
Start the VPN.
```bash
strongswan start
```

The legacy systemd unit can configured by enabling the `strongswan-starter.service` script.
```bash
systemctl enable strongswan-starter.service
systemctl start strongswan-starter.service
```
# Links
* https://www.strongswan.org/testing/testresults/ikev2/rw-cert/
* http://www.remy.org.uk/tech.php?tech=1483382049
</markdown>
生まれ変わる - umarekawaru

User Tools

Site Tools

Page Tools
